AMSOIL Motor Oils
Diesel Engine Oils
AMSOIL OE 15W-40 Synthetic Diesel Oil (OED)
OE Series API CJ-4 Synthetic 15W-40 Diesel Oil (OED)

*** This product has been discontinued and replaced with product code ADP ***
Formulated for Excellent Diesel Engine Protection and Performance. AMSOIL OE Synthetic Diesel Oil provides excellent protection and performance in both on- and off-road diesel engines for the original equipment manufacturer’s recommended drain interval. It meets API CJ-4 specifications and is suitable for both modern and older diesel applications.

1-Quart Bottle
1-Gallon Bottle
2.5-Gallon Bottle
30-Gallon Drum
55-Gallon Drum

AMSOIL Product Code: OED

MSDS Sheet For AMSOIL OED Product Data Sheet For AMSOIL OED
 

Product Application
AMSOIL OE 15W-40 Synthetic Diesel Oil is recommended for diesel engines and, where appropriate, gasoline engines requiring any of the following specifications:

Product Application Specification

• API CJ-4, CI-4+, SM...
• ACEA E9
• DDC 93K218
• Cummins CES 20081
• MB 228.31
• CAT ECF-3, ECF-2, ECF-1-a
• Mack EO-O Plus
• Volvo VDS-4
• MAN 3575
• Renault RLD-3
• MTU Type 2.1


Product Description
AMSOIL OE 15W-40 Synthetic Diesel Oil provides excellent protection and performance in both on- and off-road diesel engines for the original equipment manufacturer’s recommended drain interval. It meets API CJ-4 specifications and is suitable for both modern and older diesel applications. AMSOIL OE 15W-40 Synthetic Diesel Oil exceeds the higher performance demands of modern engines and withstands the stress of heat, soot and acids to help prevent deposits, wear and corrosion.

AMSOIL, the leader in automotive synthetic lubrication, produced the world’s first API-qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your engine.

Meets Emission System Requirements
AMSOIL OE 15W-40 Synthetic Diesel Oil is a low-sulfated ash formulation that meets the requirements for low-emission quality diesel oil and protects under the most severe conditions found in modern diesel engines. It is compatible with all exhaust treatment devices and is designed for engines equipped with diesel particulate filters (DPF).

Extreme-Temperature Performance
AMSOIL OE 15W-40 Synthetic Diesel Oil is formulated for improved heat and oxidation resistance over conventional petroleum oil for cleaner engine operation, maintaining power and fuel efficiency for superior engine performance. Its dependable cold-temperature flow assures easier start-up and improved post start-up protection.

Resists Oil Consumption and Emissions
Due to its low rate of volatility (burn-off), AMSOIL OE 15W-40 Synthetic Diesel Oil is able to reduce oil consumption and emissions during operation. It maintains its excellent film strength even during high-temperature operating conditions to ensure dependable protection, performance and fuel efficiency.

Controls Soot-Thickening and Wear
AMSOIL OE 15W-40 Synthetic Diesel Oil is formulated with premium synthetic base stocks and robust detergent/dispersant additives that keep soot particles from agglomerating and forming larger wear-causing particles. The AMSOIL OE 15W-40 Synthetic Diesel Oil formulation allows for optimal soot-related viscosity control to maintain stay-in-grade performance.

COMPATIBILITY
AMSOIL OE 15W-40 Synthetic Diesel Oil is compatible with conventional and synthetic motor oils. Mixing AMSOIL motor oils with other oils, however, will reduce the performance benefits.

Aftermarket oil additives are not recommended for use with AMSOIL motor oils.

SERVICE LIFE
AMSOIL OE Synthetic Diesel Oil is recommended for the intervals stated by the original equipment manufacturer (OEM). Refer to the owner’s manual for the specific oil change interval. Replace the oil filter at each oil change as specified by the OEM.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

Click here to view the MSDS Data Sheet for AMSOIL OED.

Keep out of the reach of children. Don't pollute. Return used oil to collection centers.


TYPICAL TECHNICAL PROPERTIES
AMSOIL OE 15W-40 Synthetic Diesel Oil (OED)

15W-40
(OED)

Four-Ball Wear Test @ 40 kg, 75°C, 1200 rpm, 1 hour; scar diameter, mm (ASTM D4172)
0.53
Kinematic Viscosity @ 100°C, cSt (ASTM D445)
14.5
Kinematic Viscosity @ 40°C, cSt (ASTM D445)
101.3
Viscosity Index (ASTM D2270)
147
CCS Viscosity @ -20°C, cP (ASTM D5293)
<5500
Flash Point °C (°F) (ASTM D92)
230 (446)
Fire Point °C (°F) (ASTM D92)
248 (478)
Pour Point °C (°F) (ASTM D97)
-38 (-36)
NOACK Volatility, % weight loss (g/100g) (ASTM D5800)
<8.0
Total Base Number (ASTM D2896)
9.0
High-Temperature/High-Shear Viscosity, cP (ASTM D5481)
4.3
   
   Copyright © 2004-2009 www.wboil.com
    All Rights Reserved